Car Paintless Dent Repair Tools Puller Removal Kit Slide Hammer Reverse Hammer T

Note:This product does not contain glue gun and glue stick, if you need, need to buy another._x000D_ Packing lncluded:_x000D_ Kit 1 (No Puller)_x000D_ 4 * Long Blue Tabs (2 Sizes)_x000D_ 2 * Holder (2 Sizes)_x000D_ Kit 2_x000D_ 20x Short Blue Tabs (5 Sizes)_x000D_ 1x T Bar Tools_x000D_ Kit 3_x000D_ 4 * Long Blue Tabs (2 Sizes)_x000D_ 2 * Holder (2 Sizes)_x000D_ 1x T Bar Tools_x000D_ Kit 4_x000D_ 20x Short Blue Tabs(5 Sizes)_x000D_ 4 * Long Blue Tabs (2 Sizes)_x000D_ 2 * holder (2 Sizes)_x000D_ 1x T Bar Tools_x000D_ Description:_x000D_ This Paintless Dent Repair T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn't sharp or creased._x000D_ The tension puller works well with a tap down hammer when pulling large dents._x000D_ It's very easy to control, everyone can removal the dent easily by yourself._x000D_ Features:_x000D_ 1. Slide hammer is more powerful for dent repair, conquer big dent._x000D_ 2. The principle is making glue tabs stick on the dent and use tools pulling the tabs and lift the dent._x000D_ 3. Big dent needs slide hammer or puller; small dent needs mini dent lifter or pulling bridge._x000D_ 4. Different tabs for different dent lifter or the Slide hammer, works with all glue pullers._x000D_ 5. Use a slide hammer or dent lifter or any pulling tools lift the dent, try many times._x000D_ How to use:_x000D_ 1.Clean the dent with a clean wet cloth;_x000D_ 2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;_x000D_ 3.Use a proper drawing gasket. Large dent requires a large drawing gasket._x000D_ 4. Pull the trigger and apply the drawing gasket with extruded glue;_x000D_ 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;_x000D_ 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;_x000D_ 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;_x000D_ 8. Clean the repaired place with a clean wet cloth.

Specification

Hign-concerned Chemical

None

Shipping & Return Policy

Estimated Delivery	14 days)
Shipping & Return Policy	Free returns · Price adjustment