Features:_x000D_
100% Brand new and high quality._x000D_
It is made of aluminium alloy for strong strength and long durability._x000D_
Used as a adapter for slide hammer or pulling tap for easy catching and pulling._x000D_
A necessary component for dent repair, direct replacement for the broken one._x000D_
Easy installation, the thread size is M10 for better application._x000D_
Specification:_x000D_
Material: Aluminum Alloy_x000D_
Color:As the picture show_x000D_
Type: M10_x000D_
Size: As the picture show_x000D_
How to use this paintless dent repair kits : _x000D_
1.Clean the dent with a clean wet cloth_x000D_
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes_x000D_
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the_x000D_
drawing gasket is, the larger the drawing force is)_x000D_
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue)_x000D_
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)_x000D_
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent_x000D_
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen_x000D_
8. Clean the repaired place with a clean wet cloth
Specification
| Hign-concerned Chemical |
None |
| Model |
Car Dent Puller kit |
Shipping & Return Policy
| Estimated Delivery |
12 days) |
| Shipping & Return Policy |
Free returns · Price adjustment |
